
Brass Foil for Fin
It is a superior material to make high quality radiator fin, with good corrosion-resistance performance in moist and high-temperature environment.
Brass foil for fin, a high precision brass foil, has high performance of conductivity, welding, processing and forming. It is a superior material to make high quality radiator fin, with good corrosion-resistance performance in moist and high-temperature environment.


Chemical Composition
JIS | EN | GB | Chemical Composition(w)% | |||
C2200 | CuZn10 | H90 | Cu | Fe | Pb | Zn |
88.0~91.0 | 0.05max. | 0.03max. | Re. |
Physical Properties
Density g/cm3 | 8.8 |
Electrical conductivity (20℃) %IACS | 43 |
Thermal conductivity (20℃) W/(m·℃) | 184 |
Coefficient of thermal expansion (20-300℃) 10-6/℃ | 18.2 |
Specific heat capacity (20℃) J/(g·℃) | 0.376 |
Modulus of elasticity GPa (KN/mm2) | 124 |
Mechanical Properties
Temper | Tensile strength | Elongation | Hardness | ||
GB | ASTM | JIS | |||
H01(1/4 Hard) | H01 | 1/4H | 285~365 | ≥10 | 90~125 |
H02(1/2 Hard) | H02 | 1/2H | 345~435 | ≥5 | 110~145 |
H04(Hard) | H04 | H | 415~515 | —— | 130~165 |
Notes: The technical data in this table is recommended. If customers have special requirements,perform according to the customer requirements. *only for information. |
Thickness and Width Tolerances
Thickness | Thickness Tolerance | Width | Width Tolerance |
0.10~0.20 | ±0.005 | 20~100 | ±0.08 |
Notes:After consultation, products with higher precision requirements can be provided. |
Other Data
Camber mm/m | 1.0 max. |
Coil ID.(for nominal sizes) mm | Ф76 / Ф100 / Ф120 /Ф150 /Ф300 |
Coil OD. mm | Ф1150 max. |
Coil mass per width Kg/mm | 8.0 max. |
Packing | wooden case |
Enterprise spirit;
Developing an never-ending business wholeheartedly and seeking progress without satisfaction.
Business belief
Developing business with superior quality and making honesty as criteria.
Hot Tags: brass foil for fin, China brass foil for fin manufactures, factory, Copper and Brass Foil, , , CuZn38 Brass Foil
Send Inquiry